tudd meg, hogy milyen chippel megy, támogatja-e a bttv, milyen tunert használ.
http://www.linuxtv.org/v4lwiki/index.php/Cardlist.BTTV
nekem egy pinaccle pctv studio szolgáltatja a műsort, a beállításaim ezek:
az /etc/modules.d/bttv fájl tartalma:
options bttv tuner=7 card=39 radio=1 automute=0 gbuffers=8
dmesg:
bttv: driver version 0.9.16 loaded
bttv: using 2 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
bttv0: Bt848 (rev 18) at 0000:02:08.0, irq: 11, latency: 64, mmio: 0xf80ff000
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ff07ff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: miro: id=1 tuner=0 radio=no stereo=no
bttv0: using tuner=7
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 0-0060: All bytes are equal. It is not a TEA5767
tuner 0-0060: chip found @ 0xc0 (bt848 #0 [sw])
tuner 0-0060: type set to 7 (Temic PAL_I (4062 FY5))
tuner 0-0060: type set to 7 (Temic PAL_I (4062 FY5))
tuner 0-0061: chip found @ 0xc2 (bt848 #0 [sw])
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
tvtime -al használom, működik szépen, tisztán.
________________
Intel(R) Pentium(R) 4 CPU 1.80GHz, 512 MB ram, 2.6.20-gentoo-r8