hehenrikBemásolom az általad javasolt Gsmartcontroll hosszú tesztjének eredményét. A végefelé vannak az értékek amik hasonlóak a fotókon levőkhöz. Egy szektorra írja mind az öt hibát. Csak azt nem tudom ez a lemez végén van e, vagy beljebb valahol.
A Western Digital programja felkínálja azt hogy tudná reparálni, csak azt nem tudom az miből áll abból hogy bekeríti és figyelmen kívül hagyja, vagy megpróbálja felülmágnesezni 66ezerszer az talán segít rajta :-)
------------------------- LIBDEBUG LOG -------------------------
[1;35m [0m[hz] Warning: exit: The device error log contains records of errors.
[1;31m [0m[gtk] (for origin information, set GTK_DEBUG): failed to retrieve property `GtkTreeView::odd-row-color' of type `GdkColor' from rc file value "((GString*) 0x98642d0)" of type `GString'
[1;31m [0m[gtk] (for origin information, set GTK_DEBUG): failed to retrieve property `GtkTreeView::odd-row-color' of type `GdkColor' from rc file value "((GString*) 0x98642d0)" of type `GString'
------------------------- EXECTION LOG -------------------------
------------------------- EXECUTED COMMAND 1 -------------------------
---------------Command---------------
'smartctl'
---------------Parameters---------------
-V
---------------STDOUT---------------
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
smartctl comes with ABSOLUTELY NO WARRANTY. This
is free software, and you are welcome to redistribute it
under the terms of the GNU General Public License Version 2.
See http://www.gnu.org for further details.
CVS version IDs of files used to build this code are:
Module: atacmdnames.cpp revision: 1.16 date: 2008/03/04
uses: atacmdnames.h revision: 1.6 date: 2008/03/04
Module: atacmds.cpp revision: 1.190 date: 2008/03/04
uses: atacmds.h revision: 1.90 date: 2008/03/04
uses: configure.in revision: 1.135 date: 2008/03/10
uses: extern.h revision: 1.54 date: 2008/03/04
uses: int64.h revision: 1.17 date: 2008/03/04
uses: scsiata.h revision: 1.2 date: 2006/07/01
uses: utility.h revision: 1.51 date: 2008/03/04
Module: ataprint.cpp revision: 1.185 date: 2008/03/04
uses: atacmdnames.h revision: 1.6 date: 2008/03/04
uses: atacmds.h revision: 1.90 date: 2008/03/04
uses: ataprint.h revision: 1.31 date: 2008/03/04
uses: configure.in revision: 1.135 date: 2008/03/10
uses: extern.h revision: 1.54 date: 2008/03/04
uses: int64.h revision: 1.17 date: 2008/03/04
uses: knowndrives.h revision: 1.18 date: 2008/03/04
uses: smartctl.h revision: 1.25 date: 2008/03/04
uses: utility.h revision: 1.51 date: 2008/03/04
Module: knowndrives.cpp revision: 1.166 date: 2008/02/02
uses: atacmds.h revision: 1.90 date: 2008/03/04
uses: ataprint.h revision: 1.31 date: 2008/03/04
uses: configure.in revision: 1.135 date: 2008/03/10
uses: extern.h revision: 1.54 date: 2008/03/04
uses: int64.h revision: 1.17 date: 2008/03/04
uses: knowndrives.h revision: 1.18 date: 2008/03/04
uses: utility.h revision: 1.51 date: 2008/03/04
Module: os_linux.cpp revision: 1.100 date: 2008/03/04
uses: atacmds.h revision: 1.90 date: 2008/03/04
uses: configure.in revision: 1.135 date: 2008/03/10
uses: int64.h revision: 1.17 date: 2008/03/04
uses: os_linux.h revision: 1.27 date: 2008/03/04
uses: scsicmds.h revision: 1.66 date: 2008/03/04
uses: utility.h revision: 1.51 date: 2008/03/04
Module: scsicmds.cpp revision: 1.96 date: 2008/03/04
uses: configure.in revision: 1.135 date: 2008/03/10
uses: extern.h revision: 1.54 date: 2008/03/04
uses: int64.h revision: 1.17 date: 2008/03/04
uses: scsicmds.h revision: 1.66 date: 2008/03/04
uses: utility.h revision: 1.51 date: 2008/03/04
Module: scsiprint.cpp revision: 1.121 date: 2008/03/04
uses: configure.in revision: 1.135 date: 2008/03/10
uses: extern.h revision: 1.54 date: 2008/03/04
uses: int64.h revision: 1.17 date: 2008/03/04
uses: scsicmds.h revision: 1.66 date: 2008/03/04
uses: scsiprint.h revision: 1.21 date: 2008/03/04
uses: smartctl.h revision: 1.25 date: 2008/03/04
uses: utility.h revision: 1.51 date: 2008/03/04
Module: smartctl.cpp revision: 1.169 date: 2008/03/04
uses: atacmds.h revision: 1.90 date: 2008/03/04
uses: ataprint.h revision: 1.31 date: 2008/03/04
uses: configure.in revision: 1.135 date: 2008/03/10
uses: extern.h revision: 1.54 date: 2008/03/04
uses: int64.h revision: 1.17 date: 2008/03/04
uses: knowndrives.h revision: 1.18 date: 2008/03/04
uses: scsicmds.h revision: 1.66 date: 2008/03/04
uses: scsiprint.h revision: 1.21 date: 2008/03/04
uses: smartctl.h revision: 1.25 date: 2008/03/04
uses: utility.h revision: 1.51 date: 2008/03/04
Module: utility.cpp revision: 1.65 date: 2008/03/04
uses: configure.in revision: 1.135 date: 2008/03/10
uses: int64.h revision: 1.17 date: 2008/03/04
uses: utility.h revision: 1.51 date: 2008/03/04
smartmontools release 5.38 dated 2008/03/10 at 10:44:07 GMT
smartmontools build host: i686-pc-linux-gnu
smartmontools build configured: 2010/03/07 05:19:06 UTC
smartctl compile dated Mar 7 2010 at 05:19:23
smartmontools configure arguments: '--prefix=/usr' '--sysconfdir=/etc' '--mandir=/usr/share/man' '--with-initscriptdir=/etc/init.d' '--with-docdir=/usr/share/doc/smartmontools' 'CXXFLAGS=-g -O2' 'LDFLAGS=-Wl,-Bsymbolic-functions' 'CPPFLAGS=' 'CFLAGS=-fsigned-char -Wall -O2'
---------------STDERR---------------
---------------Error Message---------------
------------------------- EXECUTED COMMAND 2 -------------------------
---------------Command---------------
'smartctl'
---------------Parameters---------------
-i -H -c '/dev/sda'
---------------STDOUT---------------
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: FUJITSU MHZ2160BH G2
Serial Number: K60HT9131EWJ
Firmware Version: 00000009
User Capacity: 160,041,885,696 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3f
Local Time is: Mon Jan 17 21:00:33 2011 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 649) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
---------------STDERR---------------
---------------Error Message---------------
------------------------- EXECUTED COMMAND 3 -------------------------
---------------Command---------------
'smartctl'
---------------Parameters---------------
-H -i -c -A -l error -l selftest -l selective '/dev/sda'
---------------STDOUT---------------
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: FUJITSU MHZ2160BH G2
Serial Number: K60HT9131EWJ
Firmware Version: 00000009
User Capacity: 160,041,885,696 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3f
Local Time is: Mon Jan 17 21:00:48 2011 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 649) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 52086
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 25493922
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1338
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 8589934592000
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 2639
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 4
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 5233
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1328
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 72
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 6722
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 37 (Lifetime Min/Max 10/55)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 313
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 455213056
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 1
199 UDMA_CRC_Error_Count 0x003e 200 253 000 Old_age Always - 3
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 19671
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 1533290676369
240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 18 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 18 occurred at disk power-on lifetime: 3646 hours (151 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 0f c5 f7 e7 Error: UNC 1 sectors at LBA = 0x07f7c50f = 133678351
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 08 c5 f7 e7 08 00:20:40.420 READ DMA
ec 00 00 00 00 00 a0 08 00:20:40.411 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 08 00:20:40.404 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 00:20:40.395 IDENTIFY DEVICE
c8 00 08 08 c5 f7 e7 08 00:20:35.740 READ DMA
Error 17 occurred at disk power-on lifetime: 3646 hours (151 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 0f c5 f7 e7 Error: UNC 1 sectors at LBA = 0x07f7c50f = 133678351
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 08 c5 f7 e7 08 00:20:35.740 READ DMA
ec 00 00 00 00 00 a0 08 00:20:35.731 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 08 00:20:35.724 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 00:20:35.717 IDENTIFY DEVICE
c8 00 08 08 c5 f7 e7 08 00:20:31.060 READ DMA
Error 16 occurred at disk power-on lifetime: 3646 hours (151 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 0f c5 f7 e7 Error: UNC 1 sectors at LBA = 0x07f7c50f = 133678351
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 08 c5 f7 e7 08 00:20:31.060 READ DMA
ec 00 00 00 00 00 a0 08 00:20:31.052 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 08 00:20:31.044 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 00:20:31.039 IDENTIFY DEVICE
c8 00 08 08 c5 f7 e7 08 00:20:26.292 READ DMA
Error 15 occurred at disk power-on lifetime: 3646 hours (151 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 0f c5 f7 e7 Error: UNC 1 sectors at LBA = 0x07f7c50f = 133678351
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 08 c5 f7 e7 08 00:20:26.292 READ DMA
ec 00 00 00 00 00 a0 08 00:20:26.284 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 08 00:20:26.276 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 00:20:26.271 IDENTIFY DEVICE
c8 00 08 08 c5 f7 e7 08 00:20:21.587 READ DMA
Error 14 occurred at disk power-on lifetime: 3646 hours (151 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 0f c5 f7 e7 Error: UNC 1 sectors at LBA = 0x07f7c50f = 133678351
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 08 c5 f7 e7 08 00:20:21.587 READ DMA
ec 00 00 00 00 00 a0 08 00:20:21.576 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 08 00:20:21.568 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 08 00:20:21.560 IDENTIFY DEVICE
c8 00 08 08 c5 f7 e7 08 00:20:16.880 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 5233 -
# 2 Short offline Completed without error 00% 5223 -
# 3 Short offline Completed without error 00% 5219 -
# 4 Extended offline Completed without error 00% 5132 -
# 5 Extended offline Completed without error 00% 5117 -
# 6 Conveyance offline Completed without error 00% 5115 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
---------------STDERR---------------
---------------Error Message---------------