Kittus2Milyen függőségekre gondolsz? Telepítettem a drivert, és kész, nem mondott semmit. Nincs semmi hibaüzenet. Az lsusb azt mondja, hogy
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0d8c:5200 C-Media Electronics, Inc. Mass Storage Controller(0D8C,5200)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 002: ID 04a9:2737 Canon, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
szatmari@szatmari-MS-7514:~$
A dmesg azt mondja, hogy:
[ 0.396942] pnp 00:0a: [mem 0xfff00000-0xffffffff]
[ 0.396966] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.396996] pnp 00:0b: [mem 0xffc00000-0xffefffff]
[ 0.397033] system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.397035] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.397090] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.397092] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.397126] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.397129] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.397131] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.397151] pnp 00:0d: [io 0x0060]
[ 0.397152] pnp 00:0d: [io 0x0064]
[ 0.397156] pnp 00:0d: [irq 1]
[ 0.397181] pnp 00:0d: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.397213] pnp 00:0e: [irq 12]
[ 0.397235] pnp 00:0e: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.397294] pnp 00:0f: [io 0x0000-0xffffffffffffffff disabled]
[ 0.397296] pnp 00:0f: [io 0x0a00-0x0adf]
[ 0.397297] pnp 00:0f: [io 0x0ae0-0x0aef]
[ 0.397335] system 00:0f: [io 0x0a00-0x0adf] has been reserved
[ 0.397337] system 00:0f: [io 0x0ae0-0x0aef] has been reserved
[ 0.397340] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.397372] pnp 00:10: [mem 0xe0000000-0xefffffff]
[ 0.397408] system 00:10: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.397410] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.397543] pnp 00:11: [mem 0x00000000-0x0009ffff]
[ 0.397545] pnp 00:11: [mem 0x000c0000-0x000cffff]
[ 0.397546] pnp 00:11: [mem 0x000e0000-0x000fffff]
[ 0.397548] pnp 00:11: [mem 0x00100000-0xbfffffff]
[ 0.397549] pnp 00:11: [mem 0xfed90000-0xffffffff]
[ 0.397596] system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.397598] system 00:11: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.397600] system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.397602] system 00:11: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.397604] system 00:11: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.397606] system 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.397700] pnp: PnP ACPI: found 18 devices
[ 0.397702] ACPI: ACPI bus type pnp unregistered
[ 0.399773] Switched to NOHz mode on CPU #0
[ 0.399863] Switched to NOHz mode on CPU #1
[ 0.403433] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.403436] pci 0000:00:1c.1: BAR 14: assigned [mem 0xc0200000-0xc03fffff]
[ 0.403439] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.403441] pci 0000:00:1c.1: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.403444] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc07ffff pref]
[ 0.403446] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.403448] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.403451] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff]
[ 0.403453] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.403456] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.403458] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.403462] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.403465] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.403470] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.403472] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.403476] pci 0000:00:1c.1: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.403479] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.403483] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.403485] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.403489] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.403492] pci 0000:00:1c.5: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.403497] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.403498] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.403502] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.403504] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.403517] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.403521] pci 0000:00:01.0: setting latency timer to 64
[ 0.403527] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.403530] pci 0000:00:1c.0: setting latency timer to 64
[ 0.403535] pci 0000:00:1c.1: enabling device (0104 -> 0107)
[ 0.403537] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.403540] pci 0000:00:1c.1: setting latency timer to 64
[ 0.403545] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.403548] pci 0000:00:1c.5: setting latency timer to 64
[ 0.403553] pci 0000:00:1e.0: setting latency timer to 64
[ 0.403555] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.403557] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.403559] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.403560] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.403562] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.403564] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.403565] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.403567] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe9fffff]
[ 0.403569] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.403571] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.403572] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.403574] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
[ 0.403576] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.403577] pci_bus 0000:03: resource 1 [mem 0xc0200000-0xc03fffff]
[ 0.403579] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.403581] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.403582] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.403584] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.403586] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.403587] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.403589] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.403591] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.403592] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.403594] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 0.403626] NET: Registered protocol family 2
[ 0.403737] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.404614] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.407679] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.408081] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.408082] TCP reno registered
[ 0.408089] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.408121] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.408244] NET: Registered protocol family 1
[ 0.408398] pci 0000:01:00.0: Boot video device
[ 0.408408] PCI: CLS 32 bytes, default 64
[ 0.408410] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.408413] Placing 64MB software IO TLB between ffff8800bbc00000 - ffff8800bfc00000
[ 0.408414] software IO TLB at phys 0xbbc00000 - 0xbfc00000
[ 0.408697] audit: initializing netlink socket (disabled)
[ 0.408706] type=2000 audit(1316588170.390:1): initialized
[ 0.418235] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.419525] VFS: Disk quotas dquot_6.5.2
[ 0.419566] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.420036] fuse init (API version 7.16)
[ 0.420099] msgmni has been set to 7896
[ 0.420269] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.420287] io scheduler noop registered
[ 0.420289] io scheduler deadline registered
[ 0.420317] io scheduler cfq registered (default)
[ 0.420401] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.420426] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.420462] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.420492] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.420538] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.420566] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.420610] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.420641] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.420700] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.420717] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.420751] intel_idle: MWAIT substates: 0x22220
[ 0.420753] intel_idle: does not run on family 6 model 23
[ 0.420841] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.420846] ACPI: Power Button [PWRB]
[ 0.420883] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.420885] ACPI: Power Button [PWRF]
[ 0.421026] ACPI: acpi_idle registered with cpuidle
[ 0.422088] ERST: Table is not found!
[ 0.422129] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.442616] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.486358] Freeing initrd memory: 12876k freed
[ 0.551776] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.552117] Linux agpgart interface v0.103
[ 0.553079] brd: module loaded
[ 0.553467] loop: module loaded
[ 0.553537] i2c-core: driver [adp5520] using legacy suspend method
[ 0.553538] i2c-core: driver [adp5520] using legacy resume method
[ 0.553621] ata_piix 0000:00:1f.2: version 2.13
[ 0.553641] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.553645] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.553681] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.553918] scsi0 : ata_piix
[ 0.553981] scsi1 : ata_piix
[ 0.554796] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 0.554800] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 0.554814] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.554818] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.554851] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.555006] scsi2 : ata_piix
[ 0.555054] scsi3 : ata_piix
[ 0.555697] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 0.555700] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 0.555746] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)
[ 0.555751] pata_acpi 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.555775] pata_acpi 0000:02:00.1: setting latency timer to 64
[ 0.555786] pata_acpi 0000:02:00.1: PCI INT B disabled
[ 0.555995] Fixed MDIO Bus: probed
[ 0.556015] PPP generic driver version 2.4.2
[ 0.556042] tun: Universal TUN/TAP device driver, 1.6
[ 0.556043] tun: (C) 1999-2004 Max Krasnyansky
[ 0.556106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.556120] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.556132] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.556135] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.556161] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.556214] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.560101] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.560112] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 0.580010] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.580126] hub 1-0:1.0: USB hub found
[ 0.580131] hub 1-0:1.0: 6 ports detected
[ 0.580205] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.580213] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.580216] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.580245] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.580283] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.584174] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.584184] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 0.600012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.600115] hub 2-0:1.0: USB hub found
[ 0.600119] hub 2-0:1.0: 6 ports detected
[ 0.600192] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.600203] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.600241] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.600245] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.600247] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.600274] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.610043] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[ 0.610160] hub 3-0:1.0: USB hub found
[ 0.610170] hub 3-0:1.0: 2 ports detected
[ 0.610220] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.610225] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.610227] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.610256] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.610296] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.610379] hub 4-0:1.0: USB hub found
[ 0.610382] hub 4-0:1.0: 2 ports detected
[ 0.610428] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.610433] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.610435] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.610461] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.610493] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
[ 0.610576] hub 5-0:1.0: USB hub found
[ 0.610578] hub 5-0:1.0: 2 ports detected
[ 0.610626] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.610631] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.610633] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.610660] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.610691] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[ 0.610772] hub 6-0:1.0: USB hub found
[ 0.610775] hub 6-0:1.0: 2 ports detected
[ 0.610822] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.610826] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.610828] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.610855] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.610887] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.610970] hub 7-0:1.0: USB hub found
[ 0.610973] hub 7-0:1.0: 2 ports detected
[ 0.611019] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.611023] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.611026] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.611059] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.611091] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
[ 0.611173] hub 8-0:1.0: USB hub found
[ 0.611175] hub 8-0:1.0: 2 ports detected
[ 0.611283] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.613651] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.613656] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.613737] mousedev: PS/2 mouse device common for all mice
[ 0.613829] rtc_cmos 00:03: RTC can wake from S4
[ 0.613872] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.613892] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.613958] device-mapper: uevent: version 1.0.3
[ 0.614011] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 0.614054] device-mapper: multipath: version 1.2.0 loaded
[ 0.614056] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.614139] cpuidle: using governor ladder
[ 0.614140] cpuidle: using governor menu
[ 0.614308] TCP cubic registered
[ 0.614394] NET: Registered protocol family 10
[ 0.614739] NET: Registered protocol family 17
[ 0.614749] Registering the dns_resolver key type
[ 0.615123] PM: Hibernation image not present or could not be loaded.
[ 0.615138] registered taskstats version 1
[ 0.615369] Magic number: 11:122:924
[ 0.615445] rtc_cmos 00:03: setting system clock to 2011-09-21 06:56:11 UTC (1316588171)
[ 0.615447] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.615448] EDD information not available.
[ 0.632835] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.900040] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 0.910638] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.921267] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.180013] usb 1-5: new high speed USB device using ehci_hcd and address 3
[ 1.331569] hub 1-5:1.0: USB hub found
[ 1.331919] hub 1-5:1.0: 4 ports detected
[ 1.400013] Refined TSC clocksource calibration: 3007.462 MHz.
[ 1.400018] Switching to clocksource tsc
[ 1.410054] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.410064] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.410227] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.410237] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.410245] ata2.01: link offline, clearing class 3 to NONE
[ 1.430228] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN00, max UDMA/100
[ 1.430429] ata1.00: ATA-8: WDC WD5000AAKS-00A7B2, 01.03B01, max UDMA/133
[ 1.430432] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.450018] usb 2-3: new high speed USB device using ehci_hcd and address 2
[ 1.470190] ata2.00: configured for UDMA/100
[ 1.470470] ata1.00: configured for UDMA/133
[ 1.470579] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5
[ 1.470693] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.470698] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.470732] sd 0:0:0:0: [sda] Write Protect is off
[ 1.470734] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.470754] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.475384] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN00 PQ: 0 ANSI: 5
[ 1.479105] sr0: scsi3-mmc drive: 10x/10x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.479108] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.479192] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.479252] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.511726] sda: sda1 sda2 < sda5 sda6 >
[ 1.511987] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.513272] Freeing unused kernel memory: 956k freed
[ 1.513513] Write protecting the kernel read-only data: 10240k
[ 1.514075] Freeing unused kernel memory: 184k freed
[ 1.517835] Freeing unused kernel memory: 1440k freed
[ 1.528890] udev[72]: starting version 167
[ 1.569263] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.569295] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 1.570701] scsi4 : pata_jmicron
[ 1.571058] scsi5 : pata_jmicron
[ 1.571373] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 1.571375] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.584721] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.584740] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.584776] r8169 0000:04:00.0: setting latency timer to 64
[ 1.584827] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
[ 1.585166] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xffffc90000654000, 00:21:85:97:22:a4, XID 1c4000c0 IRQ 44
[ 1.904067] ahci 0000:02:00.0: version 3.0
[ 1.904081] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.920030] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.920033] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.920038] ahci 0000:02:00.0: setting latency timer to 64
[ 1.920373] scsi6 : ahci
[ 1.920458] scsi7 : ahci
[ 1.920553] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[ 1.920556] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[ 1.925092] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.270032] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.270075] ata8: SATA link down (SStatus 0 SControl 300)
[ 12.591118] udev[326]: starting version 167
[ 12.613841] lp: driver loaded but no devices found
[ 12.698456] Adding 4192252k swap on /dev/sda6. Priority:-1 extents:1 across:4192252k
[ 12.733741] parport_pc 00:07: reported by Plug and Play ACPI
[ 12.733783] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 12.790505] type=1400 audit(1316580983.667:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=565 comm="apparmor_parser"
[ 12.791136] type=1400 audit(1316580983.667:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=565 comm="apparmor_parser"
[ 12.791535] type=1400 audit(1316580983.667:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=565 comm="apparmor_parser"
[ 12.793429] type=1400 audit(1316580983.667:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=583 comm="apparmor_parser"
[ 12.794059] type=1400 audit(1316580983.667:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=583 comm="apparmor_parser"
[ 12.794458] type=1400 audit(1316580983.667:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=583 comm="apparmor_parser"
[ 12.818640] lp0: using parport0 (interrupt-driven).
[ 12.881835] [drm] Initialized drm 1.1.0 20060810
[ 12.886015] ppdev: user-space parallel port driver
[ 12.917009] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.917014] nouveau 0000:01:00.0: setting latency timer to 64
[ 12.920813] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a0100b1)
[ 12.925940] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 12.953539] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 12.953615] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 12.953653] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.955466] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 12.961775] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04A9 pid 0x2737
[ 12.962085] usbcore: registered new interface driver usblp
[ 12.987779] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 12.987782] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 12.987785] [drm] nouveau 0000:01:00.0: Bios version 62.00.4c.00
[ 12.987787] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 12.987789] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 12.987792] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04000320 00000028
[ 12.987794] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000322 00020030
[ 12.987795] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011310 00000028
[ 12.987797] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00020030
[ 12.987798] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c1c020
[ 12.987800] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 12.987802] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 12.987804] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[ 12.987806] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 12.987808] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 12.987810] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 12.987814] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD073
[ 13.039976] hda_codec: ALC888: BIOS auto-probing.
[ 13.050248] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD49E
[ 13.051564] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 13.090019] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE93B
[ 13.090027] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEA18
[ 13.110053] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEAEA
[ 13.110056] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEB4F
[ 13.140009] [drm] nouveau 0000:01:00.0: 0xEB4F: Condition still not met after 20ms, skipping following opcodes
[ 13.186555] adt7475 0-002e: ADT7473 device, revision 1
[ 13.196337] [drm] nouveau 0000:01:00.0: Detected monitoring device: adt7473
[ 13.196422] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 13.196426] [drm] nouveau 0000:01:00.0: 0: memory 100MHz core 300MHz shader 600MHz voltage 1050mV fanspeed 100%
[ 13.196429] [drm] nouveau 0000:01:00.0: 2: memory 300MHz core 400MHz shader 800MHz voltage 1050mV fanspeed 100%
[ 13.196432] [drm] nouveau 0000:01:00.0: 3: memory 1050MHz core 655MHz shader 1408MHz voltage 1060mV fanspeed 100%
[ 13.196449] [drm] nouveau 0000:01:00.0: c: memory 297MHz core 399MHz shader 810MHz voltage 1050mV
[ 13.196581] [TTM] Zone kernel: Available graphics memory: 2029344 kiB.
[ 13.196583] [TTM] Initializing pool allocator.
[ 13.196595] [drm] nouveau 0000:01:00.0: Detected 896MiB VRAM
[ 13.196607] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 13.207659] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 13.224667] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 13.224669] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 13.225361] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 13.225363] [drm] No driver support for vblank timestamp query.
[ 13.242176] type=1400 audit(1316580984.117:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=849 comm="apparmor_parser"
[ 13.248932] type=1400 audit(1316580984.117:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=850 comm="apparmor_parser"
[ 13.260678] type=1400 audit(1316580984.137:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=850 comm="apparmor_parser"
[ 13.261081] type=1400 audit(1316580984.137:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=850 comm="apparmor_parser"
[ 13.417815] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x60000000, bo ffff88011ecc4000
[ 13.417943] fbcon: nouveaufb (fb0) is primary device
[ 13.418306] Console: switching to colour frame buffer device 160x64
[ 13.418326] fb0: nouveaufb frame buffer device
[ 13.418328] drm: registered panic notifier
[ 13.418334] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 13.615184] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 13.709302] r8169 0000:04:00.0: eth0: link down
[ 13.709307] r8169 0000:04:00.0: eth0: link down
[ 13.709669] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.993208] vboxdrv: Found 2 processor cores.
[ 13.993691] vboxdrv: fAsync=0 offMin=0x1d4 offMax=0x77d
[ 13.995130] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 13.995132] vboxdrv: Successfully loaded version 4.1.2 (interface 0x00190000).
[ 14.205178] vboxpci: IOMMU not found (not registered)
[ 14.367863] usb 1-3: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 14.367882] usb 1-3: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 15.375127] r8169 0000:04:00.0: eth0: link up
[ 15.375425] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.935539] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 17.073939] usb 1-3: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 17.073960] usb 1-3: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 19.122949] NET: Registered protocol family 24
[ 19.561320] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 22.204528] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 26.320004] eth0: no IPv6 routers present
szatmari@szatmari-MS-7514:~$
A felhasználóm jogosultságaihoz hozzáadtam minden jogot. Az lp csoportba nem sikerül belépnem, ilyenkor létre akar hozni egy új csoportot.
Úgy látom, hogy nincs külön canon csoport. Tehát azt mondom neki, hogy "csoportok kezelése" utána az LP-re kattintok és a hozzáadásra, és ilyenkor megjelenik egy párbeszédablak: új csoport létrehozása.