Sziasztok!
Vettem egy új routert, maihez adták ezt az usbs wifi adaptert. WUSB600N v2.
Ez alapján telepítettem:
What to do:
(All Kudoz to Yohann Chastre from the Ubuntu Launchpad forum)
1. Download and save the RT3572 module (look on Ralink website, Support, Linux)
2. Open Terminal, go to the Download folder (or wherever you saved the file and execute "bunzip2 2009_1222_RT3572_LinuxSTA_V2.3.0.0.tar.bz2" without the "
3. In the same terminal issue the command "tar -xvf 2009_1222_RT3572_LinuxSTA_V2.3.0.0.tar"
4. cd into the 2009_1222* folder
5. gedit common/rtusb_dev_id.c and scroll down until you see a section that starts with #ifdef RT35xx
then go further down and ADD BEFORE the #endif following line "{USB_DEVICE(0x1737,0x0079)}," without the quotes
don't forget the ,
save the file (basically you added the vendor and device id
6. gedit os/linux/config.mk and set the following flags to yes "y"
HAS_WPA_SUPPLICANT HAS_NATIVE_WPA_SUPPLICANT_SUPPORT
HAS_QOS_DLS_SUPPORT HAS_DOT11N_DRAFT3_SUPPORT
HAS_DOT11_N_SUPPORT HAS_STATS_COUNT
exit and save
7. in your terminal execute the following (without quotes)
"sudo make"
"sudo make install"
You will get a few error messages on size bigger than... just ignore
8. execute the command "sudo modprobe rt3572sta"
You are not going to believe it but then the blue led will go on and you'll find the NIC back under ra0
Minden működik, addig amíg újra nem indítom a gépet. Ekkor a sudo modprobe rt3572sta parancs beírásával újra megy. Van valamilyen megoldás, hogy mindez alapból működjön,
Segítségeteket előre is köszönöm!
Üdv,
Dani
Ezt csináltam:
sudo gedit /etc/modules
és beletettem ezt a sort
rt3572sta
Szép és jó, mert betölti, de lassan. Kb várni kell egy percet mire lesz net. Ezt nem lehetne felgyorsítani valahogy?
Végül kikapcsoltam a gépet és hagytam vagy 10 percet. Újra bekapcs és azonnal van net, még várni sem kell... :):):):D