smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.5.0-18-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Laptop HDD
Device Model: ST500LT012-1DG142
Serial Number: SBY2SA8X
LU WWN Device Id: 5 000c50 08c77e192
Firmware Version: 0001SDM1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Feb 16 23:42:33 2024 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 101) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 224518256
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 094 094 020 Old_age Always - 6234
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 34488648286
9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 11881 (59 60 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 095 095 020 Old_age Always - 5902
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 086 086 000 Old_age Always - 14
188 Command_Timeout 0x0032 100 097 000 Old_age Always - 30065360905
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 058 049 045 Old_age Always - 42 (Min/Max 24/42)
191 G-Sense_Error_Rate 0x0032 099 099 000 Old_age Always - 2571
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 729
193 Load_Cycle_Count 0x0032 089 089 000 Old_age Always - 23172
194 Temperature_Celsius 0x0022 042 051 000 Old_age Always - 42 (0 12 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 087 087 000 Old_age Offline - 11763 (78 11 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 13372029551
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 14444060205
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 14 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 14 occurred at disk power-on lifetime: 10399 hours (433 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 00:18:23.537 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 00:18:23.510 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:18:23.510 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:18:23.497 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:18:23.369 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 13 occurred at disk power-on lifetime: 10399 hours (433 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 00:18:20.733 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:18:20.715 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:18:20.706 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:18:20.705 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:18:20.698 READ FPDMA QUEUED
Error 12 occurred at disk power-on lifetime: 10399 hours (433 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 ff ff ff 4f 00 00:17:20.747 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 00:17:20.740 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 00:17:20.687 READ FPDMA QUEUED
60 00 40 ff ff ff 4f 00 00:17:20.674 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 00:17:20.647 READ FPDMA QUEUED
Error 11 occurred at disk power-on lifetime: 10399 hours (433 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 00:10:55.425 READ DMA EXT
25 00 08 ff ff ff ef 00 00:10:55.413 READ DMA EXT
25 00 08 ff ff ff ef 00 00:10:55.411 READ DMA EXT
25 00 08 ff ff ff ef 00 00:10:55.405 READ DMA EXT
25 00 08 ff ff ff ef 00 00:10:55.397 READ DMA EXT
Error 10 occurred at disk power-on lifetime: 10399 hours (433 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 00:09:58.130 READ DMA EXT
25 00 08 ff ff ff ef 00 00:09:58.125 READ DMA EXT
25 00 08 ff ff ff ef 00 00:09:58.115 READ DMA EXT
25 00 08 ff ff ff ef 00 00:09:58.102 READ DMA EXT
25 00 08 ff ff ff ef 00 00:09:58.091 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 10% 11880 971968680
# 2 Short offline Completed: read failure 20% 11877 971968680
# 3 Short offline Completed: read failure 10% 11877 971968680
# 4 Short offline Completed: read failure 10% 11877 971968680
# 5 Short offline Completed: read failure 10% 11877 971968680
# 6 Short offline Completed: read failure 10% 11877 971968680
# 7 Extended offline Completed: read failure 10% 11875 971968680
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.