P
patyomkin

  • 2018. ápr 18.
  • Csatlakozott: 2009. ápr 26.
  • 0 legjobb válasz
  • fakirSziasztok! A linux kezdo forumon kaptam egy jo kis linket a tv tuner kartyakkal kapcsolatban. Ajanlom figyelmetekbe: http://www.bttv-gallery.de/

  • gyurmakomaSzia! Egy knoppix live cd-vel bootolj be es nezd meg, hogy az /etc/fstab allomanyban, hogy mountolja fel a winyokat.Ennek analogiajara kell a sajat fstab allomanyodat megszerkeszteni.

  • Tollner ZoltánSzia! Koszonom az eszrevetelt. Valoban jobb hijan most dual boot-os gepet hasznalok. Csak szeretnek teljesen atallni a linuxra.

    • SymonSzia! Nekem is van egy P3-as letolto gepem (933MHz 512MB Ram) amin debian 5.0 fut, 1T Samsung winyo van benne. A rendszer (/) 9G -an van. A filmek 922G (/torrent) egy masik particion. Pluszz meg van 1G swap. Termeszetesen a particionalas es csatolas meg a telepiteskor megtortent. A /torrent particio meg van osztva es samban keresztul elerheto. Ha az /etc/fstab allomanyodat csatolod, akkor lehet hogy konnyebben tudunk segiteni.

    • Sziasztok! Ubuntu 10.04 rendszeren szeretnek beuzemelni egy AverMedia AverTV Hybrid FM PCI A16AR tunert. Azt gondoltam, hogy valaki kozuletek mar talalkozott ilyennel, vagy van tapasztalata a tuner kartyak beallitasaval kapcsolatban. A modulok beallitasat beraktam egy fajlba. peter@desktop-amd:~$ cat /etc/modprobe.d/saa7134 alias char-major-81 videodev alias char-major-81-0 saa7134 options saa7134 i2c_scan=1 alsa=1 card=99 install saa7134 /sbin/modprobe tuner-core; /sbin/modprobe --ignore-install saa7134;/sbin/modprobe A dmesg kimenete a kovetkezo: peter@desktop-amd:~$ dmesg |grep saa [ 18.400944] saa7130/34: v4l2 driver version 0.2.15 loaded [ 18.401025] saa7134 0000:01:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19 [ 18.401038] saa7133[0]: found at 0000:01:07.0, rev: 209, irq: 19, latency: 32, mmio: 0xe7002000 [ 18.401048] saa7133[0]: subsystem: 1461:2c00, board: AVerMedia TV Hybrid A16AR [card=99,insmod option] [ 18.401087] saa7133[0]: board init: gpio is 2b600 [ 18.401959] input: saa7134 IR (AVerMedia TV Hybrid as /devices/pci0000:00/0000:00:08.0/0000:01:07.0/input/input5 [ 18.402207] IRQ 19/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 18.552040] saa7133[0]: i2c eeprom 00: 61 14 00 2c 00 00 00 00 00 00 00 00 00 00 00 00 [ 18.552052] saa7133[0]: i2c eeprom 10: 00 ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff [ 18.552061] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 03 01 08 ff 00 a3 ff ff ff ff [ 18.552070] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.552079] saa7133[0]: i2c eeprom 40: ff 32 00 c0 86 1e ff ff ff ff ff ff ff ff ff ff [ 18.552088] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.552098] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.552107] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.552116] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.552125] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.552134] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.552143] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.552152] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.552161] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.552170] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.552179] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 18.560020] saa7133[0]: i2c scan: found device @ 0x1e [???] [ 18.576029] saa7133[0]: i2c scan: found device @ 0x86 [tda9887] [ 18.584017] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] [ 18.592044] saa7133[0]: i2c scan: found device @ 0xc0 [tuner (analog)] [ 21.256236] tuner 4-0060: chip found @ 0xc0 (saa7133[0]) [ 21.536149] tuner 4-0043: chip found @ 0x86 (saa7133[0]) [ 22.076155] saa7133[0]: registered device video0 [v4l2] [ 22.076190] saa7133[0]: registered device vbi0 [ 22.076234] saa7133[0]: registered device radio0 [ 23.382184] DVB: registering new adapter (saa7133[0]) [ 23.776123] saa7134 ALSA driver for DMA sound loaded [ 23.776146] IRQ 19/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 23.776174] saa7133[0]/alsa: saa7133[0] at 0xe7002000 irq 19 registered as card -2 Az lspci kimente a kovetkezo: peter@desktop-amd:~$ lspci 00:00.0 Host bridge: nVidia Corporation nForce2 IGP2 (rev c1) 00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1) 00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) 00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) 00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) 00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) 00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) 00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) 00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a3) 00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1) 00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio Processing Unit (rev a2) 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) 00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) 00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) 00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3) 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) 01:07.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) 01:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02) 02:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01) 02:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200] (Secondary) (rev 01) A scantv kerestem a tv csatornakat, sajnos nem talalt semmit. peter@desktop-amd:~$ scantv -C /dev/vbi0 please select your TV norm 0: NTSC 1: NTSC-M 2: NTSC-M-JP 3: NTSC-M-KR 4: PAL 5: PAL-BG 6: PAL-H 7: PAL-I 8: PAL-DK 9: PAL-M 10: PAL-N 11: PAL-Nc 12: PAL-60 13: SECAM 14: SECAM-B 15: SECAM-G nr ? 4 please select a frequency table 0: us-bcast 1: us-cable 2: us-cable-hrc 3: japan-bcast 4: japan-cable 5: europe-west 6: europe-east 7: italy 8: newzealand 9: australia 10: ireland 11: france 12: china-bcast 13: southafrica 14: argentina 15: australia-optus 16: russia nr ? 6 [global] freqtab = europe-east [defaults] input = Television norm = PAL scanning channel list europe-east... R1 ( 49.75 MHz): no station ... ... 69 (855.25 MHz): no station peter@desktop-amd:~$ v4l-conf v4l-conf: using X11 display :0.0 dga: version 2.0 mode: 1280x1024, depth=24, bpp=32, bpl=28, base=unknown /dev/video0 [v4l2]: configuration done peter@desktop-amd:~$ xawtv -hwscan This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.32-22-generic) looking for available devices port 63-78 type : Xvideo, image scaler name : Radeon Textured Video /dev/video0: OK [ -device /dev/video0 ] type : v4l2 name : AVerMedia TV Hybrid A16AR flags: overlay capture tuner A tvtime-scanner is kerestem sajnos ez sem talalt csatornakat. root@desktop-amd:~# tvtime-scanner --input=0 Konfiguráció beolvasása: /etc/tvtime/tvtime.xml Konfiguráció beolvasása: /home/peter/.tvtime/tvtime.xml Keresés a(z) PAL-60 norma használatával. /home/peter/.tvtime/stationlist.xml: No existing PAL-60 station list "Custom". Keresés a(z) 44,00 - 958,00 MHz tartományban. root@desktop-amd:~# z: - Nincs jel A tvtime-ot elinditva videoforras: compozit1 fekete szemcses kepernyo. Ha a videoforras: Television, akkor "Nincs jel" felirat jelenik meg. Egyebkent UPC kabeltv-em van. A temaval kapcsolatban tobb forumot nezegettem. A prohadveren az talaltam, hogy a ls -la /dev/vbi0 lrwxrwxrwx 1 root root 8 2005-07-21 17:44 /dev/vbi0 -> v4l/vbi0 ezt a kimenetet kellene latnom. Ezzel szemben az en kimenetem: peter@desktop-amd:~$ ls -la /dev/vbi0 crwxrw-rwx+ 1 root root 81, 1 2010-05-26 09:24 /dev/vbi0 Mar tobbszor neki futottam e dolognak, de sajnos eredmenytelenul. Bizom benne, hogy van epito eszreveteletek. Udv.: Pekob.