Sziasztok!
Felraktam a 9.10-et, új telepítéssel. Most akartam írni egy cd-t újraírható lemezre de nem működik Asus X51R. (asztali 9.10-es gépen sem)
A lemez törlés rendben lezajlik. A brasero végig csinálja a dolgát, de a lemez használhatatlan.
Ha parancssorból akarok írni akkor rögtön megáll.
tom@titan:~/qBT_dir$ cdrecord -v dev=4,1,0 speed=4 -eject ubuntu-9.10-desktop-i386.iso
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '4,1,0'
scsibus: 4 target: 1 lun: 0
WARNING: the deprecated pseudo SCSI syntax found as device specification.
Support for that may cease in the future versions of wodim. For now,
the device will be mapped to a block device file where possible.
Run "wodim --devices" for details.
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'MATSHITA'
Identification : 'DVD-RAM UJ-850S '
Revision : '1.21'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO
Drive buf size : 1310720 = 1280 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size : 12582912 = 12288 KB
Track 01: data 689 MB
Total size: 792 MB (78:30.24) = 353268 sectors
Lout start: 792 MB (78:32/18) = 353268 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 1
Reference speed: 0
Is not unrestricted
Is erasable
Disk sub type: Ultra High speed Rewritable media (2)
ATIP start of lead in: -11076 (97:34/24)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 16 1T speed high: 16
2T speed low: 8 2T speed high: 24
power mult factor: 4 5
recommended erase/write power: 1
A1 values: 66 4A 99
A2 values: 38 80 00
A3 values: 04 C4 A0
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 6581
Speed set to 1764 KB/s
wodim: Probably trying to use ultra high speed medium on improper writer.
BURN-Free was never needed.
wodim: fifo had 192 puts and 0 gets.
wodim: fifo was 0 times empty and 1 times full, min fill was 0%.
ez előtt még nem írtam parancssorból, csak gondoltam hátha a braseroval van a baj...
tudtok segíteni?
köszönöm
