Sziasztok!
Kodak z612-es gépet szeretnék csatlakoztatni Lenovo 3000 C200-hoz Edgy Eft alatt.
gphoto2, gtkam és libgphoto telepítve
Az USB-t nem tudom beállítani, amikor a camot bekapcsolom, a gtkamban ezt a hibaüzenetet kapom:
Hiba történt a kimeneti/bemeneti programkönyvtárban ('Could not claim the USB device'): Could not claim interface 0 (A művelet nem engedett). Make sure no other program or kernel module (such as sdc2xx, stv680, spca50x) is using the device and you have read/write access to the device.
Aki tudja, mi a megoldás, próbálja meg nagyon dedós módon elmagyarázni, kérem. Dolgozom én is az ügyön közben persze, de talán időt takaríthatok meg így.
Szerintem ezen a helyen van a gond:
Filesystem Device Nodes (http://www.linux-usb.org/USB-guide/x405.html)
If you use the dc2xx or mdc800 driver, you have all the security hooks you need. The instructions shown below assume that PAM will be set up to change ownership of these nodes to the logged-in user using the /etc/console.perms file. If that is not done, think carefully about the ownership and permissions you use in the instructions below. (Mode 0666 works for trusted systems, such as single users workstations with no rlogin.)
The dc2xx driver supports up to sixteen devices, but most users won't need to use more than one or two cameras. If these device nodes aren't part of your distribution, make at least the first few of them as follows:
# mknod -m 0660 /dev/usb/dc2xx0 c 180 80
# mknod -m 0660 /dev/usb/dc2xx1 c 180 81
# mknod -m 0660 /dev/usb/dc2xx2 c 180 82
# mknod -m 0660 /dev/usb/dc2xx3 c 180 83
...
# mknod -m 0660 /dev/usb/dc2xx15 c 180 95
De fogalmam sincs, mit kezdjek ezzel az infóval....
Köszönöm előre is!...