lev258Ez nem jött be:) betöltődik, a dmesg ir acpi hibát hogy megprobalta betölteni még indításkor
{syntaxhighlighter SPEC}
ACPI: resource w83627hf [io 0x0295-0x0296] conflicts with ACPI region HWMT [io 0x295-0x296]
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
{/syntaxhighlighter}
nah es azt az ACPI drivert hol keressem?
amugy van egy ilyen:
{syntaxhighlighter SPEC}
GRUB_CMDLINE_LINUX="acpi_enforce_resources=lax"
{/syntaxhighlighter}
a /etc/default/grub fájlba
utána sudo update-grub
és inditas utan van egy hasonlo nevu cucc de ezt dobja vissza:
{syntaxhighlighter SPEC}
jana@JanaUbi:~$ sensors
w83627thf-isa-0290
Adapter: ISA adapter
in0: +1.39 V (min = +0.70 V, max = +1.87 V)
in1: +0.77 V (min = +1.65 V, max = +3.18 V) ALARM
in2: +3.22 V (min = +0.38 V, max = +2.51 V) ALARM
+5V: +5.09 V (min = +4.51 V, max = +5.49 V)
in4: +3.10 V (min = +2.00 V, max = +0.00 V) ALARM
5VSB: +5.01 V (min = +4.51 V, max = +5.49 V)
Vbat: +2.91 V (min = +1.90 V, max = +0.38 V) ALARM
fan1: 2083 RPM (min = 1406 RPM, div = 8)
fan2: 3154 RPM (min = -1 RPM, div = 4) ALARM
fan3: 0 RPM (min = 2481 RPM, div = 8) ALARM
temp1: +38.0°C (high = +66.0°C, hyst = +6.0°C) sensor = thermistor
temp2: +45.5°C (high = +120.0°C, hyst = +115.0°C) sensor = diode
temp3: +23.5°C (high = +120.0°C, hyst = +115.0°C) sensor = thermistor
cpu0_vid: +1.388 V
beep_enable: enabled
{/syntaxhighlighter}
nah és itt melyik a CPU? elvileg a temp2...
miért nem kapok olyat hogy COREtemp vagy ilyesmi? akkor ezzel megoldodott?masnak is ilyen?